Showing posts with label indian bikes. Show all posts
Showing posts with label indian bikes. Show all posts

Tuesday, May 13, 2008

Yamaha to introduce forged piston in India

March 18, 2008 yamaha_logo

Keeping up with new technology and constantly bringing it to the next level, Yamaha Motor India is set to introduce forged piston which enables lighter piston design and excellent power development, in the Indian market. The forged piston is used on the new 150cc YZF-R15, which was unveiled at Auto Expo 2008, as the first on an Indian market model and a feature that reduces the reciprocating mass of the piston by approximately 20%.



Introduced in 1997, Yamaha “controlled forging technology” has been used successfully for over a decade for the mass production of forged aluminum pistons because it utilizes a system of precise control of the piece temperature, mold temperature and the forging force. Yamaha’s controlled forging technology tightly controls the forging conditions, including (1) the initial heating of the work piece, (2) controlling the temperature of the mold so that it keeps the work piece in the ideal 400 to 500 ℃ range (3) applying just the right amount of pressure to the mold in the forging process and many more factors.



According to Mr. Sanjay Tripathi, Head of Dept- Product Planning & Strategy, “Pistons for car and motorcycle engines are usually cast by pouring molten aluminum alloy into a mold. The other type of piston is the forged piston, with which the alloy is not melted but heated to the point where it can be forged into a mold under pressure. Since the aluminum is not melted in the forging process, it retains a stronger metallurgic quality. This makes possible a thinner, and thus lighter, piston that has less reciprocating mass and also contributes to weight reduction. The result is better revving and lesser engine vibrations”.



“However, there are exacting requirements involved in manufacturing a complex shaped piston and difficulties in maintaining precise temperature in the "forging" process. Due to which such pistons are expensive to produce. But Yamaha’s "controlled forging technology" enables production of the forged pistons at a lower cost”, he adds further.



The forged pistons made with Yamaha “controlled forging technology” have excellent strength characteristics that enable the design of a thinner, lighter piston with smaller reciprocating mass achieve higher rpm and performance as well as providing the greater reliability of the higher strength aluminum. For this reason they are used in YZF-R15 and many Yamaha motorcycles.

Yamaha and Mitsui enter into a joint venture in India


March 5, 2008

Yamaha Motor Co., Ltd. (Headquarters: Shingai, Iwata, Shizuoka Pref.; President: Takashi Kajikawa) (hereafter YMC) and Mitsui & Co., Ltd. (Headquarters: Otemachi, Chiyoda-ku, Tokyo; President: Shoei Utsuda) (hereafter Mitsui) today announced the agreement that Mitsui will become a joint investor in the new motorcycle manufacturing company India Yamaha Motor Private Limited (IYM) established by YMC in October 17, 2007.

Mitsui's investment will take the form of an allocation of new stock shares to a third party issued by IYM for the equivalent of 30% of the company's capitalization. In this way, IYM will increase its total capital to a planned 5.6 billion rupee (approx. 16 billion yen) and utilize the same factory and office facilities used by its predecessor, Yamaha Motor India Private Limited (YMI), to take over YMI's manufacturing and business operations beginning from April, 2008. Based on this, YMI will promptly begin the closing of its books and corporate liquidation. It will be business as usual for the employees and business partners of YMI.

Through the "Yamaha-Mitsui Strategy Committee" that was established following Mitsui's acquisition of 3% of YMC stock (announced May 2007), YMC and Mitsui have reviewed the possibilities for Mitsui's participation in various areas of YMC's business activities with the aim of strengthening its overseas business and cooperative ventures in other areas of business. The decision announced today is a result of these reviews and repeated discussions with a focus on a "comprehensive joint business venture in India."

YMC started manufacturing of motorcycles in India by establishing a joint venture company with local partner Escorts in 1996. In 2001, YMI became a 100% owned subsidiary of YMC. Then in 2005, a separate sales company, Yamaha Motor India Sales Private Limited, was established, after which the Yamaha motorcycle business in India was conducted by two companies specializing in manufacturing and marketing respectively.

With the stable growth of the Indian economy as a whole, the Indian motorcycle market has grown to 7.3 million units in 2007, making it the world's second largest market in terms of demand. The aims for the future are for YMC to aggressively introduce new high value-added models and promote a sales network strategy that includes expanding the establishments of directly-run showroom/dealerships and for Mitsui to use its strengths in logistics and dealer network development to achieve a synergistic effect that will stimulate a growth in sales of Yamaha motorcycles from 120,000 units (domestic only exclusive of exports: 60,000 units) annually in 2007 to 650,000 units (domestic only exclusive of exports: 90,000 units) annually in 2010 while improving the brand's presence in the fiercely competitive Indian market.

India Yamaha Motor Pvt. Ltd. (IYM)

Head Office:A-3 Surajpur Industrial Area, Noida-Dadri Road, Surajpur - 201306, Distt. Gautam Budh Nagar, U.P., India
Foundation:Oct. 17, 2007
Start of operation:April 1, 2008
Headed by:Mr. Tsutomu Mabuchi, Managing Director and Chief Executive Officer
Capital:1.5 billion rupee (as of Mar. 5, 2008), with plans to eventually increase capital to 5.6 billion rupee (approx. 16 billion yen)
Capital ratio:70% by Yamaha Motor Co., Ltd.
30% by Mitsui & Co., Ltd.
Number of employees:2000 (approx.)
Areas of business:Development, manufacture and sales of motorcycles, spare parts and accessories. Export of locally assembled motorcycles and parts
Scale of operations:First year (nine months beginning Apr. 2008) projected sales of 10 billion rupee (approx. 30 billion yen)

Yamaha Motor Co., Ltd. (YMC)

Location:2500 Shingai, Iwata, Shizuoka, Japan
Foundation:July 1, 1955
Headed by:Mr. Takashi Kajikawa, President and Chief Executive Officer
Capital:48,300 million yen (as of December 31, 2007)
Sales:1,756,707 million yen (consolidated, year ended December 31, 2007)
Number of employees:46,850 (consolidated, year ended December 31, 2007)
Areas of business:Manufacture and sales of motorcycles, outboard motors, boats, sail boats, water vehicles, 4-wheel ATVs, side-by-side vehicles, snowmobiles, automotive engines, surface mounters and others.

Mitsui & Co., Ltd. (Mitsui)

Location:2-1 Ohtemachi 1-chome, Chiyoda-ku, Tokyo
Foundation:July 25, 1947
Headed by:Mr. Shoei Utsuda, President and Chief Executive Officer
Capital:323,213 million yen (as of March 31, 2007)
Sales:15,357,656 million yen (consolidated, year ended March 31, 2007)
Number of employees:41,761 (consolidated, as of March 31, 2007)
Areas of business:Sales, manufacturing, exportation / importation, and international trade and services in metal products, machinery, information, chemicals, energy, consumer products and services, logistics and financial markets; diversified services including natural resource development and technology development in new fields.

Saturday, February 16, 2008

YAMAHA YZF-R15 a performance motorcycle



I had a nice chat with Yamaha official and I will be put up the portions that is left by Kenda
When will these bikes become a reality?R15-June,YZ15-October(May take a bit more time),Gladiator-A new spiced up model with Yamaha colours will up for display from tomorrow.Which market Yamaha is targeting?Yamaha from now on will only target niche market with whatever product they launches in future.From now on they won't spend any of their time in 100cc segment and everything will be performance oriented.With these two products also they are targetting a class who wants to enjoy serious performance oriented biking.So forget about mileage.
Won't the engine heat up in Indian Summer?Every step is being taken by Yamaha with the Indian summer in mind.
What will be the BHP figures?We are on the final stages of finalising the bike's performance and the BHP figure will come at the end.
What will be the price?Although it will be niche product but we will try to keep the price below 1lakh.
What about the tyres?Final tyres will be a bit different from these.We are in the process of finalising a tyre which will help in getting maximum performance out of the Bike and which will stick like a glue while cornering.
What kind of top speeds do we expect?Currently this bike(R15) is doing 140+ but we are not in a position to tell what will be the final product like.
Separate R15 from FZ15The first product is made keeping on mind an out an out performance Bike which is more race oriented while the later will give all the thrill in cutting through the traffic with your body in a angular position.

Tuesday, February 12, 2008

YAMAHA R15 FIRST update

First Update:

YAMAHA in 80's gave us RX100 (We will not talk about Legendary RD350) which has ruled the Indian bikers heart for around 15 years and later they came up with RX135 and RXZ which were not able to create a strong impact as RX100. After that Yamaha fans like me have been waiting for a performance bike from Yamaha, and here comes the best performance bike YAMAHA YZ-R150. Its a scoop, If this news is true then I think Once again Yamaha is gonna wooo… the Indian biker with its YZ-R150. This bike may be revealed in 9th Auto Expo Show which is gonna start from 10th Jan in New Delhi. list of Yamaha YZ-R150 features.

The list goes here….
- India's first fully faired motorcycle
- Front Disc, Rear Disc
- Monoshock rear, normal telescopic front forks
- MRF is making tubless tyres for the bike
- Twin lights up front (resembling like old version Fazer 1000)
- All black treatment to chassis / exhaust (the exhaust will look great)
- Split rear grab rails
- The bike has a 150cc engine
- Its Fuel Injected
- Its Liquid cooled
- It has 4 valves per cylinder
- It will pump out more power than the Pulsar 220
- It will be faster than the Pulsar 220
- It will be the best looking bike in the country by a big margain
- 150cc, 20-22bhp
- 120kgs
- 0-60km/h in 3.0 sec
- 0-100km/h in 9 sec (The Pulsar 220 manages in around 13)
- Top speed : 145km/h true, 155km/h on speedometer (The Pulsar 220 does around 133km/h true)
- Fuel Economy : around 35-40kmpl in city riding conditions

This is the teaser Pic he has posted today….:)

Yamaha YZ-R150

We will wait and see how far this is gonna true…..???


TVS Motors to introduce ABS on yet to be launched 200cc bikes

ABS(Anti-Lock Braking Systems)

-equipped bikes with an average skill rider can reliably bring a motorcycle to a dramatic, anti skid stop every time, largely because a greater percentage of technical braking force can be applied without concern for lock-up. The ABS ensures that neither the front nor rear wheel will skid - ever - and neither do they release more than necessary to just barely prevent a skid. So even in most dry consditions, braking distance can be significantly shortened for most riders due to their being consistently able to freely apply available technical braking force. When one encounters sand, railroad tracks, and grass as occasional road surfaces, the effects become particularly dramatic. On wet roads, for example, ABS still maintains optimal threshold braking, producing an abrupt, controlled stop on conditions that almost surely cause a skid if a similarly hard stop were attempted with conventional brakes. And as a result, under wet conditions the ABS bike sees braking distances consistantly reduced by atleast one third over conventional brakes.

BMW was first to bring ABS brakes to the market and today offers the widest range of motorcycles equipped with ABS. But today Honda, Yamaha, and Ducati all offer riders ABS-equipped motorcycles. Here are some models of motorcycles available with ABS brakes—either standard or as an option: Yamaha FJR1300 (no longer produced: FJ 1200A, GTS 1000)
Honda Gold Wing GL1800, ST1300 ABS, Silver Wing 600 and 400 (scooters)
Ducati ST4 ABS
BMW K1200LT, K1200S, K1200RS, K1200GT (and numerous others no longer in production)
BMW R1200RT, R1200GS, R1150RT, R1150RT-P, R1150RS, R1150R, R1100S, R1150GS, R1200C, R1200CL
BMW F650 (various)

In 2007, three manufacturers have introduced new ABS models. Moto Guzzi offer the 1200cc Norge with ABS standard. ABS is optional on the 2007 Kawasaki Concours 14 and the Triumph Sprint ST.

No Indian motorcyle is equipped with ABS till date. Now its TVS Motors of india to introduce ABS initially on yet to be launched high powered bikes of TVS in the premium 200 cc segment. By introducing ABS to its premium bikes the cost may increase by 7% to 8%. And bad part is that TVS Motors has applied for patent on this technology. I dont understand why these companies like Bajaj and TVS are so obbessed with patenting the technologies which are already there in international market.

Saturday, October 27, 2007

Super Pulsar 150 SP

Pulsar 150Pulsar 150
Pulsar 150












Dont get shocked. what u see in these pics is a Pulsar with The engine from Honda NSR 150 SP, liquid cooled two-stroke, six speed and produces 39.5 bhp.This bike is made by A bike enthusiast 'Rajkumar'. Hats-off to him for making such a awesome bike. It has great Power right from the word go and pulls strongly right through the rev range with no lag when you shift a gear. Will easily leave a RD 350 HT behind.



Pulsar 150


This is the donor bike - Honda NSR 150 SP



TVS takes lead in DTS-i patent war

TVS takes lead in DTS-i patent war

TVS motor has filed a defamation suit against Bajaj Auto in Bombay High Court and another suit in Madras High Court under the patent law. With this, TVS has taken the lead to begin the legal war with its rival, Bajaj Auto.Earlier this week, TVS filed a Rs 250-crore defamation suit in Bombay High Court against Bajaj Auto’s allegation of infringement (by TVS) of intellectual property rights on technology that is used in most Bajaj bikes. TVS has also filed another suit under the Indian Patents Act in Madras High Court to counter Bajaj’s claims on patent violation or infringement by TVS.Soon after TVS unveiled a range of new products on August 30, 2007, Bajaj had alleged that TVS had used its digital twin spark ignition technology ( DTS-i) in the latest models, including the 125-cc bike, Flame, that was showcased by TVS on the occasion.In turn, TVS declared if the “malicious and reckless charge” was not withdrawn by Bajaj, it would file a libel suit for Rs 250 crore. TVS also said it would ensure, by appropriate legal means, that Bajaj did not interfere with its use of its in-house VTi technology, on the basis of which TVS has already announced new launches commencing November.Now that TVS is preparing for the launches in November and December, it has filed the Rs 250-crore defamation suit in Bombay High Court. When contacted by ET, a senior TVS Motor official confirmed filing of the suit.“As of now, we do not know what will be the reaction from Bajaj and also when they will react,” the official added. TVS has also filed another suit in Madras High Court to counter its rival’s charge that TVS had copied its patented digital twin spark ignition technology in the 125-cc TVS flame slated to be launched in December. TVS’s contention is that it is a “groundless threat”.TVS’s stated stand on the technology issue is that “the patent rights claimed by Bajaj Auto for its Internal Combustion Engine is not for ‘twin spark plugs’ per se. It is for the use of twin spark plugs in two valve engine.” On the other hand, TVS technology is a combination of its in-house developed innovative technology VTi and use of AVL’s patented 3 valves technology in engine.In line with its stand, TVS Motor in August this year, moved an application before the Intellectual property Appellate board, Chennai, to revoke the patent granted to Bajaj Auto on the ground that patent claimed by Bajaj is a known prior art.Sources in Bajaj Auto said the company has not yet received any paper or communication from the court. The company would study the papers and take necessary action to defend itself before the court of law.Source:- Economictimes.indiatimes

Tuesday, October 23, 2007

Hero Honda completes Two Crore bikes in India..!!

India’s (and also the World's) largest two-wheeler manufacturer, Hero Honda Motors Ltd (HHML) has launched its two crore (20 millionth) bike in the country.According to the company press release (Dated: October 12, 2007):,
"The 20th million motorcycle was unveiled at a glittering ceremony here today, by Mr. Brijmohan Lall, Chairman, HHML, Mr. Pawan Munjal, MD & CEO, HHML, and Hero Honda brand ambassador and Bollywood superstar Mr. Hrithik Roshan."Mr. Pawan Munjal, says
There are not many countries in the world with a population of two crore people, and here we are – a Company with an unprecedented customer base of two crore, and growing.In a country of a billion people, it signifies a Hero Honda bike in every 50 people.This achievement is indeed reflective of the brand loyalty and the trust that Hero Honda has built amongst its customers over the years.”
To commemorate this achievement, Hero Honda has announced a campaign called "Hero Honda Country", which aims to touch the hearts and minds of customers across the length and breadth of the nation (which basically means that Hero Honda wants to reinforce its nunber one position in the minds of the India consumer).As part of the campaign, an event called "HERO HONDA BIKE-A-THON" has been flagged-off simultaneously from eight cities – Srinagar, Kolhapur, Katihar, Kolkata, Kakinada, Kanyakumari, Chennai and Mangalore. The bikers, riding a range of Hero Honda bikes, will traverse thousands of kilometers, before converging near Delhi towards the end of this month.Great going Hero Honda. But how about setting aside a few crores of Rupees for an R&D of your own..?? Agreed matching the Honda Technology isn't easy but what if tomorrow Honda decides to part ways.

source: indian2wheels.blogspot.com

Sunday, October 14, 2007

Yamaha sets out to wow Indian enthusiasts

Yamaha sets out to wow Indian enthusiasts with a slew of superbikes



From standstill to say about 60 kph, the Yamaha YZF-R1 seems barely even alive. It’s like the engine’s off. Even heavy trucks seem to keep pace with this superbike on the Delhi-Jaipur highway. But not for long, soon the trucks will be a distant memory.

With its light weight, stupendous power output and gorgeously slinky looks, the R1 can’t be anything else but Yamaha’s flagship machine. Stay on the throttle and this near-300 kph capable missile begins to wake up. At three-digit speeds, there is so much performance in reserve that sometimes you actually have to talk yourself into experiencing some of that potential. From idle in second or third, open the throttle gently but firmly and the world goes into an instant superfast rewind. Numbers come up with ludicrous intensity on the clear digital dash, while the vanishing point is hurled right inside the helmet, coming to rest gleefully on the very tip of your nose. It’s that fast. And we’ve more than half of the near-190 bhp peak power still left over to play with. Seriously impressive, eh?

But the fabulous R1 was just for starters. Yamaha Motor India decided to whet our appetites by whisking us off for a ride on not one or two, but seven superbikes. The gleaming line-up of seven motorcycles included two YZF-R1s, one in gorgeous 50th Anniversary yellow, a menacing black YZF-R6, a catty-eyed red YZF-R6S, a tall TDM900, a gigantic FJR1300, a highly attractive Yamaha-blue XJR1300 naked, and the sole cruiser, a pale gold Drag Star 1100.

Yamaha said the purpose was simply to open the CBU door a crack by allowing us (and vicariously, you!) to get a feel for what superbikes are capable of, what they feel like on Indian roads and through our rather chaotic traffic and so forth. From the start, they were clear that the R1 apart, none were anywhere close to India launch prospects, and were simply meant to allow us to experience different formats, styles, engine configurations and so forth.
Yamaha intend to launch the R1, the new 2008 model, with gold wheels, by-wire throttle and super-cool variable intake length gadgetry before the year is out. The company is figuring out the warranty and service aspect of the launch as you read this. While the pricing is yet to be finalised, the manufacturer is confident that it will fall around the Rs 10 lakh mark – that’s the US MSRP multiplied by our rather inflated 110 per cent import duties, levies and charges.

Most of the motorcycle enthusiast community in India may not have the resources to actually purchase these bikes at such stratospheric prices, but that precisely is what makes dreams so important, so poignant and so worth living for, right? Here then is what we sampled over three days.

The two R6s were there purely because they are such exciting motorcycles to ride. With redlines set at sky-high near-15,000 rpm levels, 120-odd bhp of power on tap, these two are total maniacs. The new R6 more so, thanks to its single-point fast-at-the-track focus. The R6S is actually a bit cheaper and I, for one, can actually imagine commuting happily aboard one. But as it stands, the 800cc or more rule (remember the mangoes for Harleys business?) makes the R6 and its ilk a very remote launch possibility.

Of the rest, not out-and-out sporty machinery, the XJR is extremely interesting. Its almost-100 bhp 1300cc inline-four is air-cooled, makes bags of torque and makes the XJR at once thrilling and chilled out to ride. The upright riding
position, easy manoeuvrability and legendary reliability make it a great India-ready motorcycle. This is the bike to commute on, really, and you could throw in more than a spot of relaxed (or speeded-up) touring.

The other two motorcycles, the TDM900 and the FJR1300 are less interesting to us directly, but perfectly capable machines on their own. The TDM is a road-biased adventure tourer of sorts, with a 90 bhp parallel twin engine that offers relaxed, torquey performance. It looks taller than it is, and the unstressed engine should take our conditions in its stride. The FJR, with its potent 145 bhp inline-four, on the other hand, is a full-on sports tourer, which comes with factory optional luggage, a penchant for inhaling big miles and an electric-adjustable windscreen. Both are thrilling to ride, but need a sort
of clear maturity on the riders part that we’re not ready for yet, I think.

Missing from this line-up, come to think of it, are two big ones. The FZ1 (and its sibling, the half-faired FZ1 Fazer) has not been talked about, but would be my pick for an all-round Indian superbike. The bike is based on the R1, has 150 bhp (to keep throttle wringers engaged for decades), looks superb in the 2007/08 guise and has won fans for its ability to go fast, feel good at slow speeds, and if really necessary, carry the groceries home without grumbling as well. I certainly would have loved some saddle time on one.

The other omission is the MT-01. This 1670cc V-twin powered ‘torque sportster’ is all about high design and real-world riding. And this is the second motorcycle Yamaha intend to launch in India. The launch could coincide with the R1, or come within a month or two. We were fortunate enough to snag an MT-01 for a ride, so for details on this motorcycle, do check out the October issue of Business Standard Motoring.

As you can imagine, launching these complex machines in India will be quite a task on the service front. Yamaha say they are working with hand-picked dealerships in the selected towns – where the big bikes will be sold – to train service personnel to handle the machines. Yamaha aims to offer full warranty and service support, and being an official launch, the finance companies should help open the doors to many a dream.

And Yamaha isn’t alone with big bike market ambitions either. Suzuki is working on its own CBU import programme, with the flagship GSX-R1000 (R1 competitor) and the famous GSX-R1300 Hayabusa likely to see a simultaneous launch by the end of this financial year. Honda, too, are seriously working out how they will play the big motorcycle game and once more, their flagship tourer, the venerable (and gigantic) 1800cc Gold Wing and the supersports demon, the CBR1000RR Fireblade are the rumoured names. Bajaj, who have so far denied any interest in the CBU game, are now rumoured to be in talks with Kawasaki and will eventually work out Team Green’s CBU plan as well. While that rounds off the Big Four, KTM and Ducati are also reportedly interested in the Indian market, which has taken easily and abundantly to high-end luxury products and specialised leisure brands.

But the superbike programme is not without an ulterior motive. While per unit margins on these bikes could be high, low volumes come with the territory, at least for now. Yamaha intends to use its international performance image in India – using the superbikes as leverage – to sell its new line of enthusiast oriented mass-products that should enter showrooms by early 2008.

Motorcycle sales have flagged in the lower segments, but premium segment sales have risen without a break, and more manufacturers are looking to enjoy the upper-end of the market. Many supercar makers also believe that Indians will be buying fairly exotic machinery within the next five years, and superbikes would be the natural extension of that trend.

Of course, to anyone who has been lucky enough to open the throttle on one of these machines, all of those intangibles are simply not important. The mindblowing performance is enough to justify all the dreaming that has gone on till now, and all the scrounging that is sure to follow.

Yamaha sets out to wow Indian enthusiasts

Yamaha sets out to wow Indian enthusiasts with a slew of superbikes
Yamaha


From standstill to say about 60 kph, the Yamaha YZF-R1 seems barely even alive. It’s like the engine’s off. Even heavy trucks seem to keep pace with this superbike on the Delhi-Jaipur highway. But not for long, soon the trucks will be a distant memory.

With its light weight, stupendous power output and gorgeously slinky looks, the R1 can’t be anything else but Yamaha’s flagship machine. Stay on the throttle and this near-300 kph capable missile begins to wake up. At three-digit speeds, there is so much performance in reserve that sometimes you actually have to talk yourself into experiencing some of that potential. From idle in second or third, open the throttle gently but firmly and the world goes into an instant superfast rewind. Numbers come up with ludicrous intensity on the clear digital dash, while the vanishing point is hurled right inside the helmet, coming to rest gleefully on the very tip of your nose. It’s that fast. And we’ve more than half of the near-190 bhp peak power still left over to play with. Seriously impressive, eh?

But the fabulous R1 was just for starters. Yamaha Motor India decided to whet our appetites by whisking us off for a ride on not one or two, but seven superbikes. The gleaming line-up of seven motorcycles included two YZF-R1s, one in gorgeous 50th Anniversary yellow, a menacing black YZF-R6, a catty-eyed red YZF-R6S, a tall TDM900, a gigantic FJR1300, a highly attractive Yamaha-blue XJR1300 naked, and the sole cruiser, a pale gold Drag Star 1100.

Yamaha said the purpose was simply to open the CBU door a crack by allowing us (and vicariously, you!) to get a feel for what superbikes are capable of, what they feel like on Indian roads and through our rather chaotic traffic and so forth. From the start, they were clear that the R1 apart, none were anywhere close to India launch prospects, and were simply meant to allow us to experience different formats, styles, engine configurations and so forth.
Yamaha intend to launch the R1, the new 2008 model, with gold wheels, by-wire throttle and super-cool variable intake length gadgetry before the year is out. The company is figuring out the warranty and service aspect of the launch as you read this. While the pricing is yet to be finalised, the manufacturer is confident that it will fall around the Rs 10 lakh mark – that’s the US MSRP multiplied by our rather inflated 110 per cent import duties, levies and charges.

Most of the motorcycle enthusiast community in India may not have the resources to actually purchase these bikes at such stratospheric prices, but that precisely is what makes dreams so important, so poignant and so worth living for, right? Here then is what we sampled over three days.

The two R6s were there purely because they are such exciting motorcycles to ride. With redlines set at sky-high near-15,000 rpm levels, 120-odd bhp of power on tap, these two are total maniacs. The new R6 more so, thanks to its single-point fast-at-the-track focus. The R6S is actually a bit cheaper and I, for one, can actually imagine commuting happily aboard one. But as it stands, the 800cc or more rule (remember the mangoes for Harleys business?) makes the R6 and its ilk a very remote launch possibility.

Of the rest, not out-and-out sporty machinery, the XJR is extremely interesting. Its almost-100 bhp 1300cc inline-four is air-cooled, makes bags of torque and makes the XJR at once thrilling and chilled out to ride. The upright riding
position, easy manoeuvrability and legendary reliability make it a great India-ready motorcycle. This is the bike to commute on, really, and you could throw in more than a spot of relaxed (or speeded-up) touring.

The other two motorcycles, the TDM900 and the FJR1300 are less interesting to us directly, but perfectly capable machines on their own. The TDM is a road-biased adventure tourer of sorts, with a 90 bhp parallel twin engine that offers relaxed, torquey performance. It looks taller than it is, and the unstressed engine should take our conditions in its stride. The FJR, with its potent 145 bhp inline-four, on the other hand, is a full-on sports tourer, which comes with factory optional luggage, a penchant for inhaling big miles and an electric-adjustable windscreen. Both are thrilling to ride, but need a sort
of clear maturity on the riders part that we’re not ready for yet, I think.

Missing from this line-up, come to think of it, are two big ones. The FZ1 (and its sibling, the half-faired FZ1 Fazer) has not been talked about, but would be my pick for an all-round Indian superbike. The bike is based on the R1, has 150 bhp (to keep throttle wringers engaged for decades), looks superb in the 2007/08 guise and has won fans for its ability to go fast, feel good at slow speeds, and if really necessary, carry the groceries home without grumbling as well. I certainly would have loved some saddle time on one.

The other omission is the MT-01. This 1670cc V-twin powered ‘torque sportster’ is all about high design and real-world riding. And this is the second motorcycle Yamaha intend to launch in India. The launch could coincide with the R1, or come within a month or two. We were fortunate enough to snag an MT-01 for a ride, so for details on this motorcycle, do check out the October issue of Business Standard Motoring.

As you can imagine, launching these complex machines in India will be quite a task on the service front. Yamaha say they are working with hand-picked dealerships in the selected towns – where the big bikes will be sold – to train service personnel to handle the machines. Yamaha aims to offer full warranty and service support, and being an official launch, the finance companies should help open the doors to many a dream.

And Yamaha isn’t alone with big bike market ambitions either. Suzuki is working on its own CBU import programme, with the flagship GSX-R1000 (R1 competitor) and the famous GSX-R1300 Hayabusa likely to see a simultaneous launch by the end of this financial year. Honda, too, are seriously working out how they will play the big motorcycle game and once more, their flagship tourer, the venerable (and gigantic) 1800cc Gold Wing and the supersports demon, the CBR1000RR Fireblade are the rumoured names. Bajaj, who have so far denied any interest in the CBU game, are now rumoured to be in talks with Kawasaki and will eventually work out Team Green’s CBU plan as well. While that rounds off the Big Four, KTM and Ducati are also reportedly interested in the Indian market, which has taken easily and abundantly to high-end luxury products and specialised leisure brands.

But the superbike programme is not without an ulterior motive. While per unit margins on these bikes could be high, low volumes come with the territory, at least for now. Yamaha intends to use its international performance image in India – using the superbikes as leverage – to sell its new line of enthusiast oriented mass-products that should enter showrooms by early 2008.

Motorcycle sales have flagged in the lower segments, but premium segment sales have risen without a break, and more manufacturers are looking to enjoy the upper-end of the market. Many supercar makers also believe that Indians will be buying fairly exotic machinery within the next five years, and superbikes would be the natural extension of that trend.

Of course, to anyone who has been lucky enough to open the throttle on one of these machines, all of those intangibles are simply not important. The mindblowing performance is enough to justify all the dreaming that has gone on till now, and all the scrounging that is sure to follow.
source:BSmotoring

Tuesday, September 18, 2007

Suzuki's power-mad bikes


Suzuki announces two new power-mad motorcycles for 2008

Suzuki's power-mad bikes
From the word go, the Suzuki Hayabusa sparked off cults and controversy. Its looks were never what a doting mother would call pretty, and even its performance was always borderline anti-social. Suzuki have been content to let it run amuck in original form except for two major changes along the way – restricting the poor 'Busa to 296 kph after the top speed related uproar, and the whole bunch of paintjob upgrades along the way. All that has changed with the scary-fast Kawasaki ZZR1400.

Now, Suzuki has announced the 2008 Hayabusa. It does not have an inline-six from the Stratosphere, but instead, it gets a 1340cc inline-four which it shares with the equally pupil-dilating B-King. Rumoured to make 200 bhp (or very close to that figure), the new Hayabusa is expected to top the ZZR1400 in performance. If it can do that without losing its easy-to-use personality, the new Hayabusa will go down as one of the truly great all-time motorcycle upgrades of all time.

So what have Suzuki done? The 1340cc motor is all-new, with a 16-valve DOHC format that brings 11 per cent more performance and greater smoothness. An evolution of the dual throttle valve system also makes an appearance, as does the three-way mode switch from the GSX-R1000 (to select low, intermediate and full power modes for riding in different conditions). The motor also sports titanium valves, new pistons, a super-high 12.5:1 compression ratio, and special cylinder coating. As is considered normal now, a heavier 4-2-1-2 exhaust system is employed with a large catalyser, dual triangular canisters to meet Euro 3 and Tier 2 regs.

The chassis is new as well under the new fairing, which still screams Hayabusa but is subtly different. Forks are new as is the new braced aluminium alloy swingarm with a new shape. Radial brakes are here, as are new wheels and tyres. Suzuki have further lowered the rear subframe for greater pillion comfort and lowered the tank as well so a topspeed-crazy rider can tuck deeper into the fairing. The headlight design is new as well. It also features four analog meters (speedo, tacho, fuel gauge and water temp) and includes a mode indicator, gear position indicator and an adjustable shift light as well.

As you can see, this is a pretty serious upgrade to the venerable Hayabusa. Now we cannot wait for two things, first the direct head- to-heads with the ZZR1400, and the probable launch come March 2008. Yes, Suzuki have gone on record saying the Hayabusa and the GSX-R1000 are being considered for direct import launches in India and the programme could bear fruit as early as March 2008. The Hayabusa is already a popular motorcycle icon in India and we expect the launch price to hover around the Rs 11 lakh mark. Start collecting.

The Hayabusa's close and fairly frightening looking cousin, the B-King has also gone on sale in some markets worldwide. Featuring the same 1340cc inline-four as the '08 Busa (some would say the B-King loaned its motor to the Busa), the B-King, in production form, comes with no tuning for the midrange sort of nonsense. The engine spec is close to the Busa (read above) and even the ride mode selector is there. The B-King does get its own chassis though and first ride reports suggest an unmistakable riding experience that does play havoc with the senses. The B-King is not on Suzuki's India list. Yet.

Source:BS Motoring.

Monday, September 17, 2007

XCD's AD

another good ad by bajaj

Friday, September 14, 2007

What's ailing the Japanese in India..??


What's ailing the Japanese in India..?? [Part I: Yamaha India]

A look at what's wrong with the Japanese Companies in India.. Part I: Yamaha India
yamaha_logo


The above graphic shows how Honda, Yamaha and Suzuki don't even together account for 10% of the Indian two wheeler market.So what's wrong for these Japanese companies who once taught Bajaj and TVS the trade of making two wheelers. What's ailing these Japanese Two wheeler maker..??



yamaha_logoPart I: What's ailing Yamaha India
The mere mention of the brand name "Yamaha" evokes a feeling among bike lovers which is diffcult to describe. The legend of its yesteryear superstars namely the RD350 and the RX100 still manages to overshadow the fact that Yamaha India has made straight losses since 2001.

There are many bikers around in the country who still venerate the Yamaha brand. It wouldn’t be surprising if many of them have never owned a Yamaha Before. Such is the equity of brand Yamaha in India.

Yamaha happens to be the World number two in terms of two wheeler sales after Honda. But in spite of having its presence in India since the mid eighties, Yamaha at present has a market share of just around 3 %.

Needless to say that so far Yamaha has performed below expectations in India.

Lets try to find what has gone wrong for Yamaha India..??


Product LineupLets first look at the Yamaha Products in India.. We have the

100 C.C (economizers)

Crux
Libero G5
Alba (recently launched)
125 C.C

Gladiator (with its “Type J.A” variant)

And….??Nothing else.. at least till now..!!

Ask any Tom Dick and Harry on any Indian street to associate the first word that comes across his mind with "Yamaha". I can safely bet my money that the answer will invariably be “Speed, Power, Performace”.

After the RX100 and the RD350, by no means can Yamaha make us believe that its 100 cc and 125 cc bikes are the best that it can do in India.

Administrative Problems.

In 2001, Yamaha India bought majority stake in Escorts, its erstwhile JV partner and started on its own as fully owned Japanese subsidiary. But it did not mean that Yamaha India got a fresh start in 2001. Yamaha India had to carry along the Escorts legacy in the form of its workers who previously used to work under Escorts. This is a problem that Yamaha India hasn’t been able to sort out even today.

If you don’t understand how that can be a problem, just try to teach computers to your grandpa and you will understand what I mean. Times had changed since Escorts-Yamaha used to churn out the RX100. Changing times means a different approach to work which requires a change in the mindset of the workers at Yamaha’s plant. And this is one aspect which the new Japanese Bosses at Yamaha India haven’t been able to address so far.


Inefficient and Archaic Dealerships:

Compared to the new and swanky showrooms of its competitors, majority of the dealers and showrooms of Yamaha India looks like it still belongs to the “Licence Raj” days. These dealerships have been in operational since Escorts-Yamaha days. With concepts like “Pro-Biking” showrooms of Bajaj which have been designed to provide a rich experience to the biker, Yamaha India still has a lot to pick up.

Marketing Disaster:

Similar to the how (according to me) the Honda Unicron, has been a marketing failure in India, virtually every product from Yamaha can be a case study for failed Marketing effort.After marketing research the next steps of marketing can be summed up as

Segmentation
Targeting and yamaha_logo
Positioning


First of all Marketing Dept. of Yamaha picked up the wrong Segment (100 cc segment) to play in, targeted the wrong customers (actually it beats me to decipher who is Yamaha’s 100 cc target customer) and doesn’t have a strong and clear Positing statement for its products.

Lets try to figure out “What is the positioning statement of Yamaha India’s motorcycles..” From the wheelie popping Gladiator 125 cc ads featuring , John Abraham and the latest ad of the 100 cc Alba here a Girl gets the tattoo of the 100 cc Yamaha Alba on her back, we can say that Yamaha India’s bike are positioned as fast and with sexy designs.

Sexy looks for a 100 cc commuter..?? Wheelies from a 125 cc executive commuter..?? Yeah, that's what we need. Probably you have the answer now.


What can we expect from the future..??

No matter how miserably Yamaha’s offerings’ have performed in India so far, Indians still have and probably will always have respect for any products from any Japanese Bike maker.

The day Yamaha India launches a proper performance bike, “desi” bike enthusiasts will sit up and take notice. There is no reason to believe that the World’s Second largest Two Wheeler maker can’t pull it off in India. According to me its just the matter of application and letting go of the past.

What is required is to think and start afresh. Let’s see for how long can Yamaha India keep us waiting.Inputs from: Business World

DISCOVER DISCONTINUED

DISCOVER Bajaj Auto to discontinue the Discover 112 and the Discover DTSi 125:Following with the launch of the XCD comes the news that Bajaj Auto is ceasing the production of the Discover 112 and the Discover DTSi 125. The Discover hadn’t been selling that well. As admitted by Mr. Rajiv Bajaj himself, Bajaj Auto was selling less than 5,000 Discover 112 per month (read about it here..). This leaves only the Discover DTSi 135 as the production model holding the Discover brand name. Read about it here..With the decision to discontinue the 112 and 125 cc models of the Discover, Bajaj Auto has made it clear that it will target the entry level 125 cc segment with its XCD, priced attractively at Rs. 41-42K (Ex-Showroom Pune) which is close to the price tag of the 100 cc Hero Honda Splendor.The Discover DTS-i 135 must have been successful for Bajaj since they are planning to continue with this particular model. At least in Bangalore City I have witnessed quite a few Discover DTS-I 135 cc models pottering around.

Saturday, September 8, 2007

Test ride of RTR FI, Flame

Test ride of RTR FI, Flame,Scooty Teen

Apache RTR FI - with rear disk brake
Flame - with some handy storage space on tank

check out da video for more

New P220 is big

pulsar P220
New Bajaj Pulsar 220 is really a big deal

What is performance motorcycling? Does it really have takers in a commuter-oriented market like ours? Is an indigenously developed and built larger capacity motorcycle possible?


For Indian motorcycle manufacturers, the answer to the first question so far, has been, "Who cares?" and the other two has been, "No way." Which is why the new Bajaj Pulsar DTS-Fi is a milestone.


The Indian motorcycle enthusiast's lot has been a tortured one. His demands have been swamped and diluted in a swarm of 60 kpl machines and in the entire history of Indian two-wheelers, only six or seven machines are memorable on performance terms. And of them, maybe two are on sale right now.


But with 124 kph showing on the orange-lit LCD speedometer of the new Bajaj Pulsar 220 DTS-Fi I'm on, I really should be doing other things. Like figuring out how to get the motorcycle to slow down for the uphill left turn that is coming up quickly.


It really isn't a concern, as the brakes are the best I've used. If my visor were dry and my raincoat was still in my kit bag, I'd probably be seeing closer to 135 kph on the speedo right now.
On my umpteenth fast-but-not-pushing-it lap of Bajaj's Chakan plant test-track, I'm impressed with the motorcycle and what it represents. Since the Yamaha RD350 (Yamaha RX100 and Suzuki Shogun lovers please excuse), we haven't had this classy, this fast, this good a performance motorcycle at all.



It takes corners with a delightful, eager poise, is accurate like a surgeon's scalpel and can brake hard with easy confidence. The throttle is superlight and crisp and I can already see all sorts of careless riders using it to scare themselves silly. More importantly, I can see hordes of serious riders grinning in delight.


And why not? Bajaj's design brief for the DTS-Fi was to create a no-compromise machine for the performance motorcycle enthusiast. This, they have achieved.


The motorcycle boasts a highly refined (low noise, no vibes, slick shifts and all) 220cc motor that makes a heady 20 bhp and 1.95 kgm of torque. And it is effortless, free-revving and can roll along at 50 kph in top gear should you feel the need. And return 50 kpl while you are doing that. It's almost like having your cake and eating it too.


I could, at this point, go into a 3,000-word discussion of all the various features this bike sports, some of which have never been seen on Indian motorcycles. But that would be missing the point.
In any case, you will be spending a lot of time in Bajaj's Pro-Biking showrooms listening to the harried sales guy who will be hard-pressed to remember all of them.


The big ones are tubeless tyres (one of the reasons for the great handling feel), 55-watt projector low beam headlamp (even, no-glare illumination), slick digital dash (feature packed and easy to read) and new styling package with distinctive LED taillamps. But the biggest of them all is fuel injection, which has allowed the DTS-Fi to get that linear power curve, crisp feel and instant throttle response.


A bike like the Pulsar DTS-Fi is significant because this is the first nod from a major manufacturer to the Indian performance enthusiast in years.


The Bajaj Pulsar 180 and to some extent the Hero Honda Karizma have been the staples for us, but in one stroke, they're both passe. Here is a motorcycle that's more sorted, faster and more effortless.


And while Bajaj won't say it, the DTS-Fi is not going to be outrageously expensive either. They confirmed a five-digit price tag and our sources are hinting at an on-road price of Rs 92,000 or thereabouts. Yes, fully loaded. Which is outstanding value for money.


In EMI terms, the increment over a Pulsar 180 or a Karizma would be next to nothing. In value terms, it would make a great purchase. Again, Bajaj won't say it, but we believe Diwali or during that festive period, you will be able to walk in and buy the fuel injected Pulsar from any Bajaj Pro-Biking showroom.



With these many features, obvious performance and a smart, high power price tag, the Pulsar 220 could actually change our manufacturers' answers to all the three questions we posed right at the outset.


The motorcycle will be commercially successful, there is no question about it. Obviously, it won't beat the 60 kpl commuter. But then, it doesn't have to. For the enthusiast, it would be the perfect tool to forget about those appliances.


For the manufacturers, especially rivals, it would signal the opening of a new market at the very top of the pecking order. A market all of us enthusiasts are milling about in, but the shelves have been empty so far.


The Pulsar 220 might actually cause competing products to fill the shops. We already know that TVS is working on an Apache 180. A successful P220 might even prod Hero Honda (or Honda, or both) to upgrade, re-arm or replace the Karizma with something more serious.


It might actually engineer separate market spaces for enthusiast-centric product strategy, which so far, does not exist. For us, it would be the beginning of an era of machines we've been forced to only dream about so far.


There is, of course, another perspective. I personally wish the motorcycle had been a storming 25 bhp 250cc demon. That would have elevated the price tag, but it would have represented a cleaner break with lower displacement machines.But then, the enthusiast will always want more. And therein lies the market. Usually, the enthusiast will be more likely to put his money where his mouth is. And so far, only Bajaj seems to have realised this.























Friday, September 7, 2007

RTR 160

TVS APACHE RTR 160RTR 160
RTR 160

RTR 160


RTR 160
source :overdrive
Seems like only yesterday, when we couldn’t stop complaining about TVS’ conservative outlook, be it the design of its motorcycles or the add-ons it so beautifully shied away from offering. We wanted this engineering company to gives us something sensational. And with the launch of the Apache just over a year ago, the company delivered. And how! Now, with the bike’s timely upgrade in the form of the Apache RTR 160, it seems TVS wants to rub it in.
She is an important bike, is the RTR, and not just for TVS but for biking enthusiasts in general. You see, the latest iteration of the Pulsar gave the entry level premium motorcycle buyer features which were unseen even on more expensive bikes. Now, the RTR promises to take things to a new level altogether offering both more features and better real world performance.
We spent a week thrashing the bike, gauging her show-off coefficient, and her stunting abilities. And yes, we also found time to put the RTR through our road test regime to confirm that this one isn’t just a paper tiger.

Style & build:Yellow, yellow stunning fellow
She sure is one stunning piece. And looks more so doused in yellow. The graphite theme for the engine, along with black racing strips that run her length, and the red stickering on the black alloy wheels (yes, it’s no pin striping job this, just stickering which could have been better executed), further highlight her sporty mien. But underneath all the jazz, she is identical to the Apache 150, with TVS retaining all the body panels, and the switchgear lock, stock, and barrel.
Not completely a bad thing given that Apache’s sculpted front mudguard, bikini faring, side panels and the muscular tank still look contemporary. We would have nevertheless liked to see a more innovative tail piece design. RTR, in addition, gets a belly pan, which adds to the racy appeal of
the bike.
Also new for the bike is the instrumentation featuring a yellow glow LCD screen displaying the speedo, odo, two trip meters, fuel gauge and clock. The tachometer continues to be an analogue one and houses telltale lights indicating low battery charge, service due and low fuel while weary looking indicators for high beam, turn indication and gearbox neutral reside separately. Meanwhile, the silver finish for the console as shown at the bike’s preview has been dumped for a complete black affair. LED tail lamps, which have become a norm of sorts for this product category with the Pulsar and CBZ X-Treme already sporting the same, make their way on to the RTR as well.
However, unique to the new Apache are the clip-on handlebars complete with nice looking alloy finished levers and meaty but comfortable grips. Not only do the adjustable bars add to the bike’s sporty demeanour, these along with the impressive looking alloy rearset footpegs, and a supportive seat make for a sporty but comfortable riding position as well. The bike also sports the most attractive and user-friendly set of split grab rails we have seen on an Indian bike.
The RTR leaves a little to be desired in the fit and finish area though. The LCD console doesn’t fit flush within the plastic shroud around the former revealing uneven gaps towards the lower side. Also, given the bike’s out-an-out sporty character we would have liked smaller things like the side-stand design to reflect the same. In terms of build quality, the bike held together very well over a week of hard riding with no rattles or squeaks cropping up, and if it weren’t for a dislodged clutch cable, the left side parking bulb conking off, and the fuel gauge of the LCD display behaving erratically, we’d have nothing to crib about at all

Wednesday, September 5, 2007

Engine secrets



How To Break In Your Engine For More Power & Less Wear




One of the most critical parts of the engine building process is the break in !!
No matter how well an engine is assembled, it's final power output is all up to you !!

Although the examples shown here are motorcycle engines,
these principles apply to all 4 stroke engines:

Street or Race Motorcycles, Cars, Snowmobiles, Airplanes & yes ...
even Lawn Mowers !!


( regardless of brand, cooling type, or number of cylinders. )

These same break in techniques apply to both steel cylinders and Nikasil, as well as the ceramic
composite cylinders that Yamaha uses in it's motorcycles .

What's The Best Way To Break-In A New Engine ??
The Short Answer:
Run it Hard !em>

Why ??


Nowadays, the piston ring seal is really what the break in process is all about. Contrary to popular belief, piston rings don't seal the combustion pressure by spring tension. Ring tension is necessary only to "scrape" the oil to prevent it from entering the combustion chamber.

If you think about it, the ring exerts maybe 5-10 lbs of spring tension against the cylinder wall ...
How can such a small amount of spring tension seal against thousands of
PSI (Pounds Per Square Inch) of combustion pressure ??
Of course it can't.

How Do Rings Seal Against Tremendous Combustion Pressure ??
From the actual gas pressure itself !! It passes over the top of the ring, and gets behind it to force it outward against the cylinder wall. The problem is that new rings are far from perfect and they must be worn in quite a bit in order to completely seal all the way around the bore. If the gas pressure is strong enough during the engine's first miles of operation (open that throttle !!!), then the entire ring will wear into
the cylinder surface, to seal the combustion pressure as well as possible.

The Problem With "Easy Break In" ...
The honed crosshatch pattern in the cylinder bore acts like a file to allow the rings to wear. The rings quickly wear down the "peaks" of this roughness, regardless of how hard the engine is run.

There's a very small window of opportunity to get the rings to seal really well ... the first 20 miles !!


If the rings aren't forced against the walls soon enough, they'll use up the roughness before they fully seat. Once that happens there is no solution but to re hone the cylinders, install new rings and start over again.

Fortunately, most new sportbike owners can't resist the urge to "open it up" once or twice,
which is why more engines don't have this problem !!

An additional factor that you may not have realized, is that the person at the dealership who set up your bike probably blasted your brand new bike pretty hard on the "test run". So, without realizing it, that adrenaline crazed set - up mechanic actually did you a huge favor !!

Here's How To Do It:
There are 3 ways you can break in an engine:
1) on a dyno
2) on the street, or off road (Motocross or Snowmobile.)
3) on the racetrack



--------------------------------------------------------------------------------
On a Dyno:
Warm the engine up
completely !!


Then, using 4th gear:

Do Three 1/2 Throttle dyno runs from
40% - 60% of your engine's max rpm
Let it Cool Down For About 15 Minutes

Do Three 3/4 Throttle dyno runs from
40% - 80% of your engine's max rpm
Let it Cool Down For About 15 Minutes

Do Three Full Throttle dyno runs from
30% - 100% of your engine's max rpm
Let it Cool Down For About 15 Minutes
Go For It !!

NOTE: If you use a dyno with a brake, it's critical during break - in that you allow the engine to decelerate fully on it's own. (Don't use the dyno brake.) The engine vacuum created during closed throttle deceleration sucks the excess oil and metal off the cylinder walls.

The point of this is to remove the very small (micro) particles of ring and cylinder material which are part of the normal wear during this process. During deceleration, the particles suspended in the oil blow out the exhaust, rather than accumulating in the ring grooves between
the piston and rings. This keeps the rings from wearing too much.

You'll notice that at first the engine "smokes" on decel, this is normal, as the rings haven't sealed yet. When you're doing it right, you'll notice that the smoke goes away after about 7-8 runs.
--------------------------------------------------------------------------------
On the Street:
Warm the engine up completely:
Because of the wind resistance, you don't need to use higher gears like you would on a dyno machine. The main thing is to load the engine by opening the throttle hard in 2nd, 3rd and 4th gear.

Realistically, you won't be able to do full throttle runs even in 2nd gear on most bikes without exceeding 65 mph / 104 kph. The best method is to alternate between short bursts of hard acceleration and deceleration. You don't have to go over 65 mph / 104 kph to properly load the rings. Also, make sure that you're not being followed by another bike or car when you decelerate, most drivers won't expect that you'll suddenly slow down, and we don't want
anyone to get hit from behind !!

The biggest problem with breaking your engine in on the street (besides police) is if you ride the bike on the freeway (too little throttle = not enough pressure on the rings) or if you get stuck in slow city traffic. For the first 200 miles or so, get out into the country where you can vary the speed more
and run it through the gears !

Be Safe On The Street !
Watch your speed ! When you're not used to the handling of a new vehicle, you should accelerate only on the straightaways, then slow down extra early for the turns. Remember that both hard acceleration and hard engine braking (deceleration) are equally important during the break in process.
--------------------------------------------------------------------------------
On the Racetrack:
Warm the engine up completely:
Do one easy lap to warm up your tires. Pit, turn off the bike & check for leaks or
any safety problems. Take a normal 15 minute practice session
and check the water temperature occasionally. The racetrack is the perfect environment to break in an engine !! The combination of acceleration and deceleration is just the ticket for sealing the rings.
Go For It !!

--------------------------------------------------------------------------------

Yeah - But ...

the owner's manual says to break it in easy ...
Notice that this technique isn't "beating" on the engine, but rather taking a purposeful, methodical approach to sealing the rings. The logic to this method is sound. However, some will have a hard time with this approach, since it seems to "go against the grain".
The argument for an easy break-in is usually: "that's what the manual says" ....

Or more specifically: "there are tight parts in the engine and you might do damage or even seize it if you run it hard."

Consider this:
Due to the vastly improved metal casting and machining technologies which are now used, tight parts in new engines are not normal. A manufacturing mistake causing a tight clearance is an extremely rare occurrence these days. But, if there is something wrong with the engine clearances from the factory, no amount of gentle running will fix the problem.

The real reason ???
So why do all the owner's manuals say to take it easy for the first
thousand miles ???

This is a good question ...




--------------------------------------------------------------------------------
Q: What is the most common cause of engine problems ???
A: Failure to:
Warm the engine up completely before running it hard !!!

Q: What is the second most common cause of engine problems ???
A: An easy break in !!!

Because, when the rings don't seal well, the blow-by gasses contaminate the oil with acids and other harmful combustion by-products !!

Ironically, an "easy break in" is not at all what it seems. By trying to "protect" the engine, the exact opposite happens, as leaky rings continue to contaminate your engine oil for the rest of the life of your engine !!



PICS of da tested pistons comin up inda nxt post !!!



source: http://www.mototuneusa.com/

Sunday, September 2, 2007

turbo vespa




unblevieble turbo in vespa scooter



soo what you say after seeing this video ???